Mighty Lift ML66 High Capacity Pallet Jack

Standard pallet jacks handle everyday pallet loads. The Mighty Lift ML66 is built for the jobs that go beyond that — moving up to 6,600 lbs on a reinforced, high-tensile steel frame engineered to take repeated punishment without flexing or fatiguing.

The hydraulic pump is galvanized for corrosion resistance and uses a cushioned descending mechanism that lowers loads smoothly, preventing the sudden drops, tilting, and product damage that come with cheaper pumps. German-made seals rated for 60,000 cycles keep the hydraulics sealed over a long service life.

Control runs through a 3-position hand lever — raise, lower, neutral — backed by a foot-control mechanism for quick load commands. A 210° steering arc lets the operator pivot the truck in tight aisles and around obstacles, while entry and exit rollers ease the forks under pallets without hang-ups.

The handle is wrapped in a shock-proof grip that stays usable in hot, sweaty, or cold conditions, with an extra 9-inch reinforcement at the base for added strength where handles tend to fail first. Ten pre-lubricated grease zerks at every joint and pivot point keep maintenance simple and slow down wear.

• Capacity up to 6,600 lbs on a reinforced high-tensile steel frame
• Corrosion-resistant galvanized hydraulic pump with cushioned descent to prevent sudden load drops, tilting, and damage
• German-made seals rated for 60,000 cycles
• Shock-proof ergonomic handle grip for hot, sweaty, or cold conditions
• Extra 9" handle reinforcement at the base for added strength and service life
• 3-position hand control lever (raise, lower, neutral) plus a foot-control mechanism for quick load command
• Adjustable push rods to prevent fork damage and load tilting
• Entry and exit rollers to prevent hang-ups and keep the operator moving
• 10 pre-lubricated grease zerks at every joint and pivot point to reduce wear
• 7" polyurethane steering wheels and 3" polyurethane load wheels
• 210° steering arc for maneuvering in tight areas

How much can the ML66 lift?

The ML66 is rated to move loads up to 6,600 lbs, putting it above the capacity of a standard-duty pallet jack.

What are the fork dimensions?

The forks measure 48" long with an overall width of 27" across both forks (6.3" per fork, 14.37" between them). They lower to 2.9" to slide under pallets and raise to 7.6".

What kind of wheels does it have?

It rolls on 7" polyurethane steering wheels and 3" polyurethane load wheels, suited to smooth indoor floors.

How much does it weigh?

The unit weighs 170 lbs. Packaged for shipping it weighs 220 lbs and crates at 65" × 48" × 23".

Manual and technical documents available on request — contact sales@forkliftking.com or call +1 (307) 441-9566.