Mighty Lift ML2796-44 Heavy Duty Pallet Jack

The Mighty Lift ML2796-44 is a heavy-duty hand pallet jack built for oversized and extra-long loads that a standard 48-inch jack cannot carry safely. Its forks measure 96 inches long and are made from one-piece, high-tensile structural steel rather than roll-formed steel, so the load is supported along its full length without the flex that shorter, lighter jacks develop under long freight.

Rated to 4,400 lbs, the ML2796-44 spans 27 inches across both forks with a 14.37-inch gap between them, sizing it for wide pallets, crating, pipe, lumber, and other long material that overhangs a conventional jack. The forks lower to 2.9 inches to enter standard pallets and raise to 7.6 inches for transport.

Specially developed Super Poly steering wheels require less initial static pulling force than standard polyurethane wheels, and a 210-degree steering arc keeps the long chassis maneuverable in tight aisles. Entry and exit rollers on the fork tips prevent hang-ups when loading and unloading pallets.

• 96-inch forks made of one-piece structural steel for full-length load support
• Super Poly steering wheels — lower initial static pulling force than standard poly wheels
• Corrosion-resistant galvanized, one-piece pump with overload protection
• Cushioned descent mechanism to prevent sudden load drop, tilting, and damage
• German-made seals rated for 60,000 cycles
• Ergonomic handle with shock-proof grip for hot, cold, or wet conditions
• Extra 9-inch handle reinforcement for added strength and service life
• 3-position hand control lever — raise, lower, neutral
• Foot control for quick load engagement
• Adjustable push rods to prevent fork damage and load tilting
• Entry and exit rollers to prevent hang-ups and keep loading efficient
• 10 pre-lubricated grease zerks at every joint and pivot point
• 7-inch polyurethane steering wheels and 3-inch polyurethane load wheels
• 210-degree steering arc for maneuvering in tight areas

How long are the forks, and what are they made of?

The forks are 96 inches long and made from one-piece, high-tensile structural steel — not roll-formed steel — so they support long loads along their full length.

What is the rated capacity?

The ML2796-44 is rated to 4,400 lbs.

Will the forks fit a standard pallet?

The forks lower to 2.9 inches to enter a pallet and raise to 7.6 inches. Overall fork width is 27 inches, with 14.37 inches between the two forks.

What wheels does it use?

It rides on 7-inch polyurethane Super Poly steering wheels and 3-inch polyurethane load wheels.

Manual and technical documents available on request — contact sales@forkliftking.com or call +1 (307) 441-9566.