GNT GFC85 Lithium Ride On Floor Washer

The GNT GFC85 is a ride-on floor scrubber built for facilities that need ride-on productivity without a full-size machine's footprint. A compact frame and small turning radius let it work the aisles, corners, and congested areas of supermarkets, schools, hospitals, retail centers, and mid-sized industrial spaces — the comfort and speed of a ride-on washer in a body that still fits where larger units cannot.

An 85 L clean-water tank and 95 L recovery tank are sized for extended runs without adding unnecessary bulk. The onboard 24V 80Ah lithium battery delivers 3 to 4 hours of working time and recharges in 3 to 4 hours, so a charge covers a full cleaning shift in most facilities.

Strong, consistent brush pressure and even water delivery give deep, uniform cleaning on concrete, tile, epoxy, and polished floors. Behind the brush, a reinforced squeegee assembly and a 500W suction motor pull water off the floor and leave it dry and ready for foot traffic. Low-noise operation keeps the GFC85 suitable for public and noise-sensitive environments.

• Compact ride-on design — a small turning radius and streamlined frame let the GFC85 operate in tighter spaces than traditional ride-on washers.
• Efficient floor washing system — strong brush pressure and consistent water delivery produce deep, uniform cleaning on concrete, tile, epoxy, and polished floors.
• Balanced tank capacity — 85 L clean-water and 95 L recovery tanks support extended operation without oversizing the machine.
• Operator-friendly controls — a simple, intuitive interface with clear visibility and comfortable seating for long shifts.
• Durable construction — reinforced components and a robust squeegee assembly built to withstand daily commercial use.
• Low-noise operation — quiet enough for public environments and noise-sensitive facilities.
• Fast drying performance — a strong suction system leaves floors clean, dry, and ready for foot traffic.

What floor surfaces can the GFC85 clean?

The GFC85 is designed for concrete, tile, epoxy, and polished floors, using consistent brush pressure and even water delivery for uniform results across each surface.

How much floor area can it clean in an hour?

Work efficiency is rated at 3,000 m²/h (~32,300 ft²/h) on the A-model and 3,500 m²/h (~37,700 ft²/h) on the B-model.

How long does the battery run, and how long to recharge?

The 24V 80Ah lithium battery provides 3 to 4 hours of working time and recharges in 3 to 4 hours.

Does it dry the floor as it cleans?

Yes. A reinforced squeegee assembly paired with a 24V / 500W suction motor pulls water off the floor behind the brush, leaving it dry and ready for foot traffic.

What is the difference between the A-model and B-model?

The A-model has a 560 mm cleaning width, a single 24V / 550W brush motor, and 3,000 m²/h efficiency. The B-model has a 660 mm cleaning width, dual 24V / 550W brush motors, and 3,500 m²/h efficiency.

Will it fit tight spaces?

The GFC85 uses a compact frame and small turning radius, with an overall footprint of 1350 × 900 mm (53.1 × 35.4 in), to operate in tighter spaces than traditional ride-on washers.

Manual and technical documents available on request — contact sales@forkliftking.com or call +1 (307) 441-9566.