GNT GFC150 Lithium Ride On Floor Washer

The GNT GFC150 is a heavy-duty ride-on floor washer built for large commercial and industrial floors where cleaning speed and uptime matter. It runs an 860 mm cleaning path behind a 1,150 mm squeegee, so a single pass washes and dries a wide track instead of forcing repeat runs. With a 150 L solution tank and a 170–180 L recovery tank, the operator covers long cycles before stopping to refill or drain — the machine is rated to clean up to 6,000 m² per hour.

Power comes from a 24V 150Ah lithium battery driving twin 550W brush motors, a 650W suction motor, and a 1,000W traction motor. A full charge takes 6–8 hours and supports 3–4 hours of continuous washing — enough to cover a warehouse, distribution floor, or retail sales area within a shift. The ride-on traction drive keeps the operator seated and moving rather than walking behind the machine, which reduces fatigue on large floors.

The GFC150 is built for daily commercial duty: a reinforced chassis, corrosion-resistant components, and a robust squeegee assembly support a long service life, while low-noise operation makes it workable in public-facing and noise-sensitive spaces.

• High-efficiency washing — a wide cleaning path and strong brush pressure deliver deep washing on concrete, epoxy, tile, and polished floors.
• Large-capacity tanks — high-volume solution and recovery tanks support long washing cycles with fewer interruptions.
• Powerful traction drive — smooth, responsive ride-on operation increases coverage per shift and reduces operator fatigue.
• Industrial-grade construction — a reinforced chassis, corrosion-resistant components, and a robust squeegee assembly support a long service life.
• Operator-friendly controls — an intuitive interface, comfortable seating, and clear visibility for long shifts.
• Low-noise operation — quiet enough for public spaces and noise-sensitive environments.
• Easy maintenance access — wide tank openings and accessible service points simplify daily cleaning and routine maintenance.

The GFC150 is rated for hard commercial and industrial flooring — concrete, epoxy-coated floors, tile, and polished surfaces. It suits large open environments including warehouses, logistics and distribution centers, retail sales floors, and manufacturing facilities where wide, continuous cleaning runs are the norm.

What surfaces can the GFC150 clean?

It is designed for concrete, epoxy-coated floors, tile, and polished surfaces, using strong brush pressure for deep washing on hard commercial flooring.

How much floor can it cover?

The GFC150 is rated at up to 6,000 m² per hour (about 64,600 sq ft), with 3–4 hours of continuous washing on a single charge.

How long does the battery run and take to charge?

The 24V 150Ah lithium battery supports 3–4 hours of washing and recharges in 6–8 hours.

How wide is the cleaning path?

The wash path is 860 mm (33.9 in) wide, followed by a 1,150 mm (45.3 in) squeegee that dries the floor in the same pass.

How large and heavy is the machine?

The GFC150 measures 1,680 × 1,240 × 1,400 mm (66.1 × 48.8 × 55.1 in) and has a net weight of 230 kg (507 lb).

Does the operator ride or walk behind it?

It is a ride-on machine. The operator sits and steers while the traction drive moves the unit, which reduces fatigue over large floors.

Manuals and technical documents for the GFC150 are available on request — contact sales@forkliftking.com or call +1 (307) 441-9566.