GNT GFC13 Lithium Folding Floor Washer

The GNT GFC13 is a compact, cordless walk-behind floor washer built for daily cleaning in commercial and industrial spaces. It lays down water and detergent, scrubs with twin counter-rotating brushes, and vacuums the dirty water straight back into the recovery tank in a single pass — leaving floors clean and ready to walk on. With a 430 mm (16.9 in) cleaning path and a working rate of 800–1,000 m²/h (roughly 8,600–10,800 ft²/h), it covers open warehouse floors and tight retail aisles without trailing a power cord.

The frame folds down quickly for transport and tight storage, and at 19.5 kg (43 lb) a single operator can move and deploy it without help. Power comes from a built-in 36V 10.5 Ah lithium battery that recharges in about 3 hours, so the machine runs untethered through a shift and parks small between jobs.

• Folding frame for easy storage — the structure folds down quickly for transport or tight storage areas.
• Dual rotating scrub brushes — two 212 mm (8.3 in) brushes turning at 350 rpm for deep cleaning on concrete, epoxy, tile, and warehouse flooring.
• Lightweight, maneuverable design — an ergonomic handle and balanced weight distribution allow smooth operation in aisles, corners, and high-traffic zones, with a 430 mm (16.9 in) turning radius.
• Water and detergent system — controlled flow keeps cleaning results consistent while reducing waste, fed from a 4 L clean-water tank.
• Durable industrial housing — built to withstand daily use in warehouses, retail facilities, and commercial buildings.
• Simple, operator-friendly controls — plug-and-go operation minimizes training time and keeps cleaning moving.

The GFC13 is rated by GNT for hard commercial and industrial floors, including:

• Sealed and bare concrete
• Epoxy-coated floors
• Tile
• General warehouse flooring

It is suited to warehouses, retail facilities, and commercial buildings where a full-size ride-on scrubber is more machine than the space needs.

What floor surfaces can the GFC13 clean?

GNT rates the GFC13 for concrete, epoxy, tile, and general warehouse flooring — hard floors typical of commercial and industrial buildings.

How much floor area can it cover per hour?

Working efficiency is 800–1,000 m²/h, roughly 8,600–10,800 ft²/h, across a 430 mm (16.9 in) cleaning path.

Is it cordless, and how long does it take to charge?

Yes — it runs on a built-in 36V 10.5 Ah lithium battery with no power cord, and recharges in about 3 hours.

Does it pick up the dirty water, or just scrub?

It does both. The brushes scrub while the 150W suction motor (15 kPa) pulls the dirty water back into the 6.5 L sewage tank across a 450 mm suction width.

How easy is it to store and move between jobs?

The frame folds down for storage, and the machine weighs 19.5 kg (43 lb), so one operator can carry, transport, and deploy it without assistance.

Manual and technical documents available on request — contact sales@forkliftking.com or call +1 (307) 441-9566.