GNT GD85 Diesel Forklift

The GNT GD85 is a four-wheel diesel forklift rated to lift 8,500 lbs at a 24-inch load center to a 185-inch maximum lift height. Built around a high-strength steel frame, it is sized for heavy-duty material handling across warehouses, factories, distribution centers, and outdoor yards.

Power comes from a Kubota or Mitsubishi 4EG diesel engine, Tier 4 EPA compliant for strong performance with lower emissions. The Mitsubishi 4EG is rated at 49 HP at 2,250 rpm, delivering diesel torque for full 8,500 lb loads at travel speeds of 10.3 mph loaded and 11.2 mph unloaded. Solid pneumatic tires give traction and stability on outdoor yards and uneven terrain without the puncture risk of air-filled tires.

The operator station is built for long shifts: an enlarged operation space with a semi-suspension seat and a small-diameter steering wheel for lighter steering effort, plus a suspension cab with cushion connections and damping devices that cut the shock and vibration reaching the operator. An overhead guard and a noise-reduction mast design support safer, quieter operation, and a small turning radius keeps the truck maneuverable in narrow aisles and busy work areas.

The GD85 ships attachment-ready. A Cascade® side shift lets the operator reposition a load laterally for precise fork placement without re-aligning the whole truck, and a pre-plumbed Shimadzu® 4-way valve supports smooth multi-function hydraulic control and additional attachment mounting. Forks measure 48 x 5.9 x 1.9 inches, with 37.9 inches of free lift and an 86.2-inch lowered mast height for moving through standard doorways and trailers.

• Tier 4 EPA-compliant diesel engine — Kubota or Mitsubishi 4EG, strong performance with reduced emissions.
• 49 HP at 2,250 rpm (Mitsubishi 4EG) — diesel torque for full 8,500 lb loads at up to 11.2 mph unloaded.
• 8,500 lb load capacity at a 24-inch load center — heavy-duty handling across warehouses, factories, and distribution centers.
• Strong off-road capability — solid pneumatic tires deliver traction and stability on outdoor yards and uneven terrain.
• Cascade® side shift — lateral load positioning for precise fork placement without repositioning the truck.
• Shimadzu® 4-way valve, pre-plumbed — smooth multi-function hydraulic control and attachment readiness.
• Suspension cab and semi-suspension seat — cushion connections and damping devices reduce shock and vibration on long shifts.
• Overhead guard and noise-reduction mast — improved operator safety and quieter operation.
• High-strength steel frame — built for long-lasting reliability under tough conditions.
• Small turning radius — maneuverability in narrow aisles and busy work areas.

How much can the GD85 lift, and at what load center?

It is rated for 8,500 lbs at a 24-inch load center, to a maximum lift height of 185 inches.

What engine does it use, and is it emissions compliant?

It runs a Kubota or Mitsubishi 4EG diesel engine, Tier 4 EPA compliant. The Mitsubishi 4EG is rated at 49 HP at 2,250 rpm.

Can it work outdoors on uneven ground?

Yes. Solid pneumatic tires provide traction and stability for outdoor yards and uneven terrain, and the diesel drivetrain is suited to heavy outdoor material handling.

Can it run attachments?

Yes. It comes with a Cascade® side shift for lateral load positioning and a pre-plumbed Shimadzu® 4-way valve that supports multi-function hydraulic control and additional attachments.

Will it fit through a standard doorway or into a trailer?

The mast lowers to 86.2 inches and the truck is 52.9 inches wide. Confirm your specific door and trailer clearances against the full dimensions above before ordering.

Manual and technical documents available on request — contact sales@forkliftking.com or call +1 (307) 441-9566.